CyberData Systems 011097 User Manual

Page of 3
VoIP V2 Loudspeaker Amplifier
CyberData Corporation  
  3 Justin Court, Monterey, CA 93940  
  831.373.2601  
  Fax: 831.373.4193  
  www.cyberdata.net
CyberData Corporation  
  3 Justin Court, Monterey, CA 93940  
  831.373.2601  
  Fax: 831.373.4193  
  www.cyberdata.net
VoIP V2 Loudspeaker Amplifier
CyberData Corporation  
  3 Justin Court, Monterey, CA 93940  
  831.373.2601  
  Fax: 831.373.4193  
  www.cyberdata.net
The IP Endpoint Company
The IP Endpoint Company
Features
 
SIP and Simultaneous Multicast
 
Dual-speed ethernet 10/100 Mbps
 
Web-based configuration
 
PoE 802.3at and 802.3af-enabled
 
Line-in for background music
 
Line-out connector
 
DTMF controlled relay
 
Direct 8 Ohm speaker drive
 
User-uploadable tones and messages
 
Digital and manual volume control
 
Second SIP endpoint "Night Ringer"
 
Autoprovisioning
 
Auto-call voice message from input port sense
The new CyberData V2 SIP-enabled VoIP Loudspeaker
Amplifier provides an easy method for implementing an IP-based 
overhead paging system for both new and legacy installations.
Now with up to 25 watts output (802.3at)
With up to 25 watts of driving power (802.3at), the Amplifier 
provides direct drive of a standard Horn speaker and supports 
a line-out connector for connection to an external amplifier.
The interface is compatible with most SIP-based IP PBX 
servers that comply with the SIP RFC 3261. For non-SIP 
environments, the Loudspeaker Amplifier can be configured to 
listen to multicast address and port number combinations to 
form paging zones.
Ringer Mode
The VoIP V2 Loudspeaker Amplifier supports two SIP 
extensions. One extension can be assigned to a page group for 
auto answer paging. The second extension can be assigned to 
a “First-to-Answer” ring group with IP phones. An audio ring file 
is activated when the second SIP extension of the ceiling 
speaker is dialed. If any of the IP phones in the ring group is 
answered (or if the caller hangs up), the Loudspeaker Amplifier 
stops ringing.
Loudspeaker (part #011068) must be purchased separately.
 
 
 
Specifications
Output
802.3af - up to 8 watts
802.3at - up to 25 watts
Dimensions
Power Input
PoE 802.3at or 802.3af
Ethernet I/F
10/100 Mbps
G711
Payload Types
2 Years Limited
Warranty
Protocol
SIP RFC 3261
Regulatory Compliance
FCC Class A
   -30 to 55 C (-22 to 131 F)   
 
          
Operating Temperature
14" x 10" x 4"
Boxed Weight 
               6.5 lbs.
Part Number
Loudspeaker Amplifier, AC
011095
Loudspeaker Amplifier, Wireless
Loudspeaker Amplifier, PoE
011097
011096
Line Out:
Output Signal Amplitudes 
2.0 VPP maximum
Output Level 
 
+2dBm nominal
Total Harmonic Distortion 
0.5% maximum
Output Impedance   
10k Ohm
Line In:
Input Signal Amplitudes 
2.0 VPP maximum
Input Impedance 
 
10k Ohm
 011068
Loudspeaker Part Number