Kaba GmbH BNET9104 User Manual
Manual B-Net® 91 04
Description of the Subpartyline
12/2008
© Kaba GmbH
45
8.6
Data from the Control Unit to the Subterminal
Receive polling
Control unit
Subterminal
The subterminal does not respond if the address is different from its own address,
or if an error has been detected, or if the two address characters are different. The
control unit repeats the receive poll after an internal time-out.
or if an error has been detected, or if the two address characters are different. The
control unit repeats the receive poll after an internal time-out.
<EOT> GID GID DID DID <ENQ>
no
response
If the address has been detected correctly, the receive poll is acknowledged by the
subterminal by ACK0. After that the control unit sends the data record, which is
acknowledged by ACK1 if correctly received. If the control unit receives a correct
acknowledgement, the control unit terminates the transmission by sending an EOT.
subterminal by ACK0. After that the control unit sends the data record, which is
acknowledged by ACK1 if correctly received. If the control unit receives a correct
acknowledgement, the control unit terminates the transmission by sending an EOT.
<EOT> GID GID DID DID <ENQ>
<ACK0>
<STX> Text <ETX> <LRC>
<ACK1>
<EOT>
If the control unit’s data record has not been received correctly, the subterminal will
acknowledge by sending an NAK until the record has been understood.
acknowledge by sending an NAK until the record has been understood.
<EOT> GID GID DID DID <ENQ>
<ACK0>
<STX> Text <ETX> <LRC>
<NAK>
<STX> Text <ETX> <LRC>
<ACK1>
<EOT>
If the control receives no correct acknowledgement, it will send an ENQ to request
a retry of the acknowledgement.
a retry of the acknowledgement.
<EOT> GID GID DID DID <ENQ>
<ACK0>
<STX> Text <ETX> <LRC>
no response
<ENQ>
<ACK1>
<EOT>