OKI ML3390 01091308*01256402 User Manual

Chapter 7: Accessories

7-26

Paper feed

Replace the old support with
the new paper support pro-
vided with the roll paper
stand. The paper support is
installed as described in
Chapter 1.

Place the hooks of the roll
paper stand precisely in the
cutouts of the paper support
and tilt the support back-
wards. The connecting cable
will point to the back when
this is done.

Connect the cable plug of the
roll paper stand to the socket
on the back of the printer.
The arrow on the plug
shows the correct way to
plug it in.

Insert the roll paper as described below:

Insert the roll shaft into the core of the paper roll and open the
paper guide of the roll paper stand. Insert the shaft into the roll
paper stand so that the slotted end of the shaft engages in the
slot of the left holder and the paper runs off from the bottom.