OKI ML3390 01091308*01256402 User Manual

Chapter 10: IBM - Standard Functions

10-20

Insert single sheet

27 25 73

1B 19 49

ESC EM I

Eject single sheet

27 25 82

1B 19 52

ESC EM R

A line feed command feeds a sheet of paper from the Cut Sheet
Feeder (CSF) to the set Top of Form. Any sheet of paper already in
the printer is ejected before a new one is fed in.

The eject command causes data in the printer buffer to be printed
and the sheet to be ejected. If the page end or the area to be skipped
at the page end is reached, the sheet is ejected and a new sheet is
automatically fed in and advanced to the print position. Any de-
fined Top of Form position, however, is disregarded. Therefore,
when a Cut Sheet Feeder is installed the page change in the case of
multipage documents must be done with the form feed command.

Select bin 1

27 25 49

1B 19 31

ESC EM 1

Select bin 2

27 25 50

1B 19 32

ESC EM 2

With the two bin selection commands you can, when using a dual
bin Cut Sheet Feeder, define from which bin paper is to be fed.

When using the dual-bin feeder Top of Form positions can be set for
each bin. You can select the priority bin in the printer menu with
CSF Bin Select

 in the SET UP group. You can then define via the

control panel the Top of Form position for the paper from the bin
selected via the menu. You can, for example, feed a form with pre-
printed letterhead from one bin, with a Top of Form position at a
large distance from the top edge of the sheet, followed by single
sheets from the other bin with a Top of Form position near to the
top edge of the sheet.

Bin selection

Printing cut sheets