OKI ML3390 01091308*01256402 User Manual
Product codes
01091308*01256402
Chapter 10: IBM - Standard Functions
10-26
The Code Pages can also be selected via the printer menu by changing
the values in the Code Page menu item for example from USA to
Multilingual
the values in the Code Page menu item for example from USA to
Multilingual
. The available Code Pages are shown in Appendix B.
Code Pages are used as tables of printable characters. The character
columns 2 to 7 and A to F are available in IBM Character Set I. The
IBM Character Set II enables you to have access to character colums
8 and 9, whereas IBM´s All Printable Character Set gives you access
to all 256 printable characters as described in the previous "IBM
Character Set" section.
columns 2 to 7 and A to F are available in IBM Character Set I. The
IBM Character Set II enables you to have access to character colums
8 and 9, whereas IBM´s All Printable Character Set gives you access
to all 256 printable characters as described in the previous "IBM
Character Set" section.
Other commands
Function
Dec.
Hex.
ASCII
Carriage return
13
0D
CR
If this command is entered, all data in the line buffer are printed
and the next print position is set at the left margin. For short line
seeking, the print head does not make these movements immedi-
ately; the print position is only logically set at the left margin. If
Auto LF
and the next print position is set at the left margin. For short line
seeking, the print head does not make these movements immedi-
ately; the print position is only logically set at the left margin. If
Auto LF
is set to Yes after each carriage return the printer executes
a line feed command. This command deactivates double width
printing for one line.
printing for one line.
Function
Dec.
Hex.
ASCII
Backspace
8
08
BS
With this command the print position is set to the last received
printable character. This command is only executed if a printable
character or a print command then follows.
printable character. This command is only executed if a printable
character or a print command then follows.
The actual width of a backspace depends on the current pitch.
When using proportional spacing the backspace command moves
the print position 1/10 inch to the left. If the print position is reset to
a superscript character, a reverse line feed is executed to the posi-
tion of the character in question and the next character is printed
superscript; however, the alignment may not be quite exact.
When using proportional spacing the backspace command moves
the print position 1/10 inch to the left. If the print position is reset to
a superscript character, a reverse line feed is executed to the posi-
tion of the character in question and the next character is printed
superscript; however, the alignment may not be quite exact.
If the print position is to be reset by several characters, a backspace
command must be entered for each character to be overprinted.
command must be entered for each character to be overprinted.
Backspace
Carriage return