OKI ML3390 01091308*01256402 User Manual
Product codes
01091308*01256402
Appendix E: Paper formats and print areas
E-4
Further information
g
e
h
f
a
b c
d
print area
a = 88,9 to 216 mm /
88,9 to 363 mm
b = 76 to 420 mm
c = printable length
d = printable width
e = min. 6,35 mm
f = min. 4,35 mm
g = 6,35 to 28,6 mm
h = min. 6,35 mm
Format
●
The transportation holes must be exactly round and precisely
punched. The rim may be toothed.
punched. The rim may be toothed.
●
The paper must be folded alternately along the horizontal perfo-
ration. Do not use paper lying in loops because problems with
the paper feed may occur. Also avoid waves and wrinkles
(mainly occurring with the first and last sheets of a new paper
stack). Do not use these sheets.
ration. Do not use paper lying in loops because problems with
the paper feed may occur. Also avoid waves and wrinkles
(mainly occurring with the first and last sheets of a new paper
stack). Do not use these sheets.
●
If the continuous paper is separated along the horizontal perfo-
ration, the separation rim must be straight, i.e. separation rims
and corners must not be wavy or wrinkled.
ration, the separation rim must be straight, i.e. separation rims
and corners must not be wavy or wrinkled.
Cut sheets
The standard paper format is DIN A4 (210 x 297 mm). Other paper
formats (DIN A5, DIN B5, etc.) can also be used.
formats (DIN A5, DIN B5, etc.) can also be used.
●
The paper width (a) is between 88.9 and 216 mm (small printer)
and between 88.9 and 363 mm (large printer).
and between 88.9 and 363 mm (large printer).
●
The paper length (b) is 76 to 420 mm.
●
The measurements for the non-printable area (g/h) are between
6.35 and 28.6 mm. For paper with a width of 304.8 mm the size
must be between 19.05 and 28.6 mm.
6.35 and 28.6 mm. For paper with a width of 304.8 mm the size
must be between 19.05 and 28.6 mm.