OKI ML3390 01091308*01256402 User Manual
Product codes
01091308*01256402
Chapter 7: Accessories
7-7
Paper
guides
guides
Lever
Paper feed
The paper tray of the cut sheet feeder has a maximum capacity of
100 sheets (90 g/m
100 sheets (90 g/m
2
) or 170 sheets (60 g/m
2
) of standard paper.
A mark on the left guide rail indicates the maximum amount of
paper. Read also the further notes on paper in Chapter 3.
paper. Read also the further notes on paper in Chapter 3.
1.
Set the paper set lever at the
right end of the cut sheet
feeder upwards to the RE-
SET position. The paper tray
will open towards the back.
right end of the cut sheet
feeder upwards to the RE-
SET position. The paper tray
will open towards the back.
Warning!
Direct pressure on the platen can cause damage to the
print head and pins. Make sure the paper guide is correctly
adjusted.
print head and pins. Make sure the paper guide is correctly
adjusted.
2.
Take a stack of paper, fan it
to part the sheets and insert
it into the sheet feeder. Make
sure the stack of paper is ly-
ing on the bottom of the tray.
to part the sheets and insert
it into the sheet feeder. Make
sure the stack of paper is ly-
ing on the bottom of the tray.
3.
Make sure the rear paper
stands are positioned equal-
ly between the paper guides.
stands are positioned equal-
ly between the paper guides.