OKI ML3390 01091308*01256402 User Manual
Product codes
01091308*01256402
Chapter 7: Accessories
7-12
6.
Move the right bracket rail
approximately 15 cm to the
right; the mounting bracket
is now extended to approxi-
mately 45 cm wide. Align
the fixing hole precisely to
the pin and the threaded
hole on the cut sheet feeder
and refit the right hand
screw (B).
approximately 15 cm to the
right; the mounting bracket
is now extended to approxi-
mately 45 cm wide. Align
the fixing hole precisely to
the pin and the threaded
hole on the cut sheet feeder
and refit the right hand
screw (B).
7.
Turn the cut sheet feeder
over and fasten the screw
(A) to the inside right of the
output tray. Replace the cut
sheet feeder on the printer as
described further on.
over and fasten the screw
(A) to the inside right of the
output tray. Replace the cut
sheet feeder on the printer as
described further on.
Checking the items
supplied
supplied
The pull tractor feed
You feed continuous paper from the bottom when you wish to print
types of paper that are not suitable for feeding around the platen.
Such types of paper are multi-part forms, adhesive labels on
backing paper and other special papers. You will need to use a pull
tractor feed for this.
types of paper that are not suitable for feeding around the platen.
Such types of paper are multi-part forms, adhesive labels on
backing paper and other special papers. You will need to use a pull
tractor feed for this.
Check that the individual items
supplied are complete and un-
damaged. You should have re-
ceived, depending on the mo-
del:
supplied are complete and un-
damaged. You should have re-
ceived, depending on the mo-
del:
• 1 tractor feed
(narrow or wide)
• 1 acoustic cover
(narrow or wide)
Remove the packing material. Keep the original packing material
safe so that you can transport the tractor feed safely at a later date if
necessary.
safe so that you can transport the tractor feed safely at a later date if
necessary.