OKI ML3390 01091308*01256402 User Manual
Product codes
01091308*01256402
Chapter 7: Accessories
7-15
☞
Note!
Do not use the “Park” function in conjunction with the tractor
feed otherwise the continuous paper will run completely out
of the tractor guide.
feed otherwise the continuous paper will run completely out
of the tractor guide.
With the tractor feed fitted, you can feed continuous paper from
below the printer and print on it. Before doing this, place the printer
on a printer table provided with a feed slot. The stack of continuous
paper is placed under the table.
below the printer and print on it. Before doing this, place the printer
on a printer table provided with a feed slot. The stack of continuous
paper is placed under the table.
1.
Switch the printer off.
2.
Move the paper lever at the
right side of the printer for-
wards to the continuous pa-
per position (REAR); the
symbol on the cover shows
the correct position for the
lever.
right side of the printer for-
wards to the continuous pa-
per position (REAR); the
symbol on the cover shows
the correct position for the
lever.
3.
Feed the continuous paper
through the feed slot in the
bottom of the printer and up
to the level of the platen. From above, pull the paper upwards
beyond the tractor feed.
through the feed slot in the
bottom of the printer and up
to the level of the platen. From above, pull the paper upwards
beyond the tractor feed.
Warning!
Direct pressure on the platen can cause damage to the
print head and pins. Make sure the paper guide is correctly
adjusted.
print head and pins. Make sure the paper guide is correctly
adjusted.
Feeding continuous
paper
paper