DynaStream Innovations Inc. 3067 User Manual
D52Q ANT Module
Part of the D52 Module Series from Dynastream Innovations
ANT® Operation (using the latest s212 or s332 SoftDevice)
79 selectable RF channels (2402 to 2480 MHz)
(preliminary)
(preliminary)
Flexible network topologies: peer-to-peer, star, tree,
high node count, mesh and more
high node count, mesh and more
Broadcast, acknowledged, and burst data
communication modes
communication modes
Built-in device search and pairing
Built-in interference handling and radio coexistence
management with application radio disable requests
and application flash write/erase requests
management with application radio disable requests
and application flash write/erase requests
Enhanced ANT features:
o
Supports up to 15 logical channels each with
configurable channel periods (5.2ms - 2s)
configurable channel periods (5.2ms - 2s)
o
Advanced burst data transfer modes (up to
60kbps)
60kbps)
o
Optional channel encryption mode (aes-128)
o
Supports up to 8 public, private and/or managed
networks
networks
o
Advanced power management features to
optimize application power consumption including
Event Filtering and Selective Data Updates
optimize application power consumption including
Event Filtering and Selective Data Updates
o
Asynchronous transmit channel
o
Fast channel initiation
ANT/Bluetooth® Smart operation (when loaded with the
latest s3XX soft-device)
latest s3XX soft-device)
ANT operation functions as S212
Bluetooth 4.2 compliant low energy single-mode
protocol stack suitable for Bluetooth Smart products
protocol stack suitable for Bluetooth Smart products
o
Concurrent Central, Observer, Peripheral, and
Broadcaster roles with up to:
Broadcaster roles with up to:
Multiple connections as a central
One connection as a peripheral
Observer
Broadcaster
o
Link layer
o
L2CAP, ATT, and SM protocols
o
GATT and GAP APIs
o
GATT Client and Server
[future: module picture]
Module Hardware
20 x 20 x 2.7mm module using the nRF52832 chip from
Nordic Semiconductor in two SKUs:
Nordic Semiconductor in two SKUs:
o
D52QD2M4IA – Module
o
D52QD2M4IA-A – Module + accelerometer
o
Layout compatible with N5 M4, AP2, C7
o
Additional LGA pads for extended nRF52 features
Integrated printed antenna
On-board 32.768 kHz and 32 MHz crystal clocks
Supply Voltage range:
o
1.7V to 3.6V
o
1.71V to 3.6V when using accelerometer
Internal DC/DC converter supported
Operating temperature: Industrial (-40°C to +85°C)
29 GPIOs
o
23 GPIOs for accelerometer SKU
Programmable output per channel from -20dBm up to
4dBm
4dBm
Excellent receiver sensitivity
o
–92.5dBm ANT mode
o
–96.5dBm BLE mode
1dBm resolution RSSI
Total 512kB flash, 64kB RAM
SPI, I2C and UART interface
ARM SWD interface
Available onboard ST LIS2DH accelerometer
o
3-axis MEMS accelerometer
o
2 programmable interrupt pins
Radio regulatory approval for major markets
(engineering samples are provided pre-certification)
(engineering samples are provided pre-certification)
BLUETOOTH SIG qualification
RoHS compliant
D00001675
D52Q ANT Module OEM/Integrators Installation Manual / Data sheet
Rev 0.4