Humax F2-1003 User Manual

3. Installation Wizard

button, and press the <OK> button.

If you cannot find the LNB frequency value from the list, select User Define, manually enter the

frequency using the <numerical> button, and then press the <OK> button

[Note]

When using Universal LNB, select Universal for LNB Frequency which is 9750/10600(MHz). Also, if you

select Universal, 22KHz tone value is disabled.

③

Set up 22kHz Tone.

Select 22kHz Tone using the ▲▼ button, and press the <OK> or <X> button to change the setting.

When using 22kHz tone switch, select Enable. Otherwise, select Disable

④

Select DiSEqC switch.

Select DiSEqC using the ▲▼ button, and press the <OK> or <X> button to display DiSEqC Switch

List.

Select DiSEqC Switch using the ▲▼ button and then press the <OK> button.

⑤

When you complete the setting, select Next using the ▲▼ button and press the <OK> button to start

Automatic Search

[Note]

1. If the antenna is correctly set up, the level at signal strength bar and quality bar, which are located at