Humax F2-1003 User Manual

9. Software Update

①

Select Manual Update from Software Update screen

using the ▲▼ button, and press the <ok> or <right>

button.

Select the the Satellite which provides update

software. Satellite list contains the satellites that have

been set to Enable in Installation -Antenna Setting-

Satellite Alternative menu. For unlisted satellite, start

with Antenna Setting.

②

Enter Transponder Frequency in which updated

software is provided.

③

Enter Polarisation value.

④

Select Symbol Rate value. If it is not found in the List,

select User Define and enter manually.

⑤

Select FEC value.

[Note]

How to setting Satellite and Transponder for Manual Update

Sites is the same as how to edit User Define Transponder

data in Manual Search. Refer to Manual Search.

⑥

Select Search and Press the <OK> button to search

software.

⑦

It is displayed whether or not New Software exist.

If new software does not exist, press the <OK> button

to return to the Manual Update Menu.

⑧

Select Yes and press the <OK> button to start

updating. Select No and press the <OK> button to

return to the previous menu.

⑨

Performs Software Update. Please wait until it is

completed.

⑩

When completing the software update, the product is

automatically powered off and on again.