Pelican Accessories CHAM1 User Manual
Mode LED / Analog Button:
Press the Analog Button to switch modes. When
the LED is red the controller is in analog mode,
and when the LED is off the controller is in digital
mode. The Mode LED is located on the Receiver
Unit.
Press the Analog Button to switch modes. When
the LED is red the controller is in analog mode,
and when the LED is off the controller is in digital
mode. The Mode LED is located on the Receiver
Unit.
Power LED:
The Power LED will come on when you have the
Chameleon Wireless switched into channel posi-
tion 1, 2, or 3.
The Power LED will come on when you have the
Chameleon Wireless switched into channel posi-
tion 1, 2, or 3.
Signal LED:
The Signal LED is green and will flicker under nor-
mal opperation to show data is being transfered.
The Signal LED is green and will flicker under nor-
mal opperation to show data is being transfered.
Relocated L2 / R2 Buttons:
The L2 / R2 buttons have been relocated to give
the user greater comfort and a much quicker reac-
tion time than other controllers.
The L2 / R2 buttons have been relocated to give
the user greater comfort and a much quicker reac-
tion time than other controllers.
5. Branchez votre nouveau récep
teur « Chameleon » dans le port
contrôleur un. Si vous avez déjà
un contrôleur et vous voulez utilis
er le « Chameleon » sans fil
comme deuxième contrôleur,
assurez-vous de brancher un con
trôleur dans le port un et le
récepteur dans le port contrôleur
deux.
contrôleur un. Si vous avez déjà
un contrôleur et vous voulez utilis
er le « Chameleon » sans fil
comme deuxième contrôleur,
assurez-vous de brancher un con
trôleur dans le port un et le
récepteur dans le port contrôleur
deux.
6. Insérez un jeu dans votre
PlayStationMD2, et mettez le sys
tème sous tension.
tème sous tension.
7. La DEL témoin deviendra verte
dès que la connexion sera faite
entre le contrôleur et le récep
teur.
entre le contrôleur et le récep
teur.
8. Vous êtes maintenant prêt à
jouer.
25
8