Pelican Accessories PRED-S2 User Manual
Troubleshooting
If you are having difficulties with your new Predator 2.4
Wireless Controller please refer below:
Wireless Controller please refer below:
My system turns on but I don’t see anything on the TV.
1. Check to verify that your A/V cable is properly
1. Check to verify that your A/V cable is properly
connected to your system.
2. Check to verify that your A/V cable is properly plugged
into your television set.
My Predator 2.4 Wireless Controller does not respond.
1. Check to verify that your batteries are inserted correctly.
1. Check to verify that your batteries are inserted correctly.
2. Check to verify that the power is on. Check to verify that
the signal LED is blinking.
the signal LED is blinking.
The power LED is on but my Predator 2.4 does not
respond while in the system menu.
1. Check to verify your Predator 2.4 Receiver / Transmitter
unit is firmly and properly plugged into correct controller
port.
respond while in the system menu.
1. Check to verify your Predator 2.4 Receiver / Transmitter
unit is firmly and properly plugged into correct controller
port.
2. Check to verify that the receiver is firmly connected to
the system and the light is on. Then, press the connect
button, wait three seconds and press Start or any action
button on the controller in the corresponding slot.
the system and the light is on. Then, press the connect
button, wait three seconds and press Start or any action
button on the controller in the corresponding slot.
10