Askey Computer Corp RT480W User Manual
Wireless Broadband Router User Manual
22
Part 2. Configuring protocol-specific settings
According to the connection type you selected above, proceed to
set up related parameters.
set up related parameters.
X
DHCP Client
If DHCP Client is your option, no other configuration is needed.
You may just click Apply to end your WAN settings. After the
connection to your ISP is established, the information provided by
your ISP will be displayed in the Status group.
You may just click Apply to end your WAN settings. After the
connection to your ISP is established, the information provided by
your ISP will be displayed in the Status group.
Figure 4-4 WAN Configuration-DHCP Client
X
PPPoE Client
If PPPoE Client is your option, configure these fields as required by
your ISP.
your ISP.
PPPoE Connection Status: This item is not configurable. It
displays whether the connection is up or down.
displays whether the connection is up or down.
Username/Password: Enter the username and password
provided by your ISP used to log on to Internet connection.
provided by your ISP used to log on to Internet connection.
Connection Mode: Select your PPP connection from these
options:
options:
Keep Alive: This feature will keep your PPPoE-enabled
Internet connection always alive. This is done by sending echo
requests periodically to ISP to prevent the connection from
being terminated by ISP.
Internet connection always alive. This is done by sending echo
requests periodically to ISP to prevent the connection from
being terminated by ISP.