Inovonics Wireless Corporation 3B63MB4 User Manual

 

8 

The base station must be turned off to enable operation/use of the auxiliary intercom. 

1.  Connect the auxiliary intercom to the “TO AUXILIARY INTERCOM” terminals on the interconnect module 

as shown in Figure 8 through Figure 10 (depending on the model of intercom used). 

The presence alert shown is wired to operate only when the Model C1060 is turned off. 

If a separate outside microphone is used, the auxiliary intercom must be configured for OUTSIDE MIC.  
Refer to the Auxiliary Intercom Installation Instructions for information about moving any internal jumpers.