Inovonics Wireless Corporation 3B6OT9GSKC User Manual
10.16.17 06884D © Inovonics, 2017 - www.inovonics.com
EN1245 Family Wireless CO Detector
Installation Instructions
1 Overview
The wireless CO detector features an onboard sounder, a CO sensor, LED
indicators and local test capability to allow the user total visibility of its
functionality. It is self-monitoring, alerting the user when sensor
maintenance is needed or batteries are low and automatically supervising
the radio link.
The wireless CO detector is available in the following configurations:
indicators and local test capability to allow the user total visibility of its
functionality. It is self-monitoring, alerting the user when sensor
maintenance is needed or batteries are low and automatically supervising
the radio link.
The wireless CO detector is available in the following configurations:
The wireless CO detector is intended for open area protection and for
connection to a compatible control unit for operation as part of a household
fire alarm system (UL985).
connection to a compatible control unit for operation as part of a household
fire alarm system (UL985).
Note: For UL 2560 installations, refer to the EN6080 Area Control
Gateway Installation Instructions.
Gateway Installation Instructions.
1.1 Maximum Number of Repeaters for a UL 2560
Installation
Installation
To achieve the 99.99% alarm message reliability required for UL 2560
compliance, system installations must operate within the following limits for
end device and repeater counts.
compliance, system installations must operate within the following limits for
end device and repeater counts.
1.2
Inovonics Contact Information
If you have any problems with this procedure, contact Inovonics technical
services:
services:
• E-mail: support@inovonics.com.
• Phone: (800) 782-2709; (303) 939-9336.
• Phone: (800) 782-2709; (303) 939-9336.
1.3 Wireless CO Detector External Components
Figure 1 Wireless CO detector external components
Device Indicators
1.4 What’s In The Carton
• One 3V-Lithium battery, installed.
• Two drywall anchors.
• Two mounting screws.
• Two drywall anchors.
• Two mounting screws.
2 Installation and Startup
2.1 Installation Notes
• These products are designed to be maintained by professional
security technicians.
• Products are tested for indoor use.
• All products should be manually tested semi-annually.
• All products should be manually tested semi-annually.
2.2 Activate the Battery
1. Twist the detector counterclockwise and lift it off of the mounting base.
2. Remove the tag in the battery compartment to connect the battery.
3. Ensure the battery is seated.
2. Remove the tag in the battery compartment to connect the battery.
3. Ensure the battery is seated.
Part #
Check-In
Location
EN1245
3 minutes
North America
EN1245-60
60 minutes
North America
EN1245A
3 minutes
Australia
EN1245Z
3 minutes
New Zealand
End
Devices
Devices
Maximum
Repeaters
Repeaters
150
397
250
386
350
375
500
360
1000
313
2000
238
3000
184
For product and installation videos visit us at
www.inovonics.com/videos or use the QR
code below.
www.inovonics.com/videos or use the QR
code below.
Green LED
Red LED
Sounder
Normal
(standby)
(standby)
Blinks every
10 seconds
10 seconds
Off
Off
Alarm/test
Off
Blinks
every one
second
every one
second
Temporal 4 pattern:
Four short beeps
followed by a five
second pause. If
conditions return to
normal, the detector
self-restores out of
alarm.
Four short beeps
followed by a five
second pause. If
conditions return to
normal, the detector
self-restores out of
alarm.
Low battery
Off
Blinks
every 45
seconds for
37 days
every 45
seconds for
37 days
Chirps every 45
seconds beginning
seven days after the
LED begins blinking;
continues for 30 days
seconds beginning
seven days after the
LED begins blinking;
continues for 30 days
Detector trouble
Off
Blinks
every five
seconds
every five
seconds
Chirps every 45
seconds
seconds
Detector end-of-
life
life
Off
Blinks
every 10
seconds
every 10
seconds
Chirps every 45
seconds
seconds
Power up
LED blinks
every ten
seconds for a
total of four
times
every ten
seconds for a
total of four
times
LED blinks
every ten
seconds for
a total of
four times
every ten
seconds for
a total of
four times
Off
Test
button
button
Green
LED
LED
Red
LED
LED