Honeywell International Inc. 8670 User Manual

Page of 4
8670 Bluetooth
®
 Ring Scanner
Quick Start Guide
Rev A
3/16
Aller à 
 per l'italiano.
Gehe zu 
 für Deutsch.
Ir a 
 para español.
Para Português, acesse 
.
Ring Scanner Overview
Note: The battery must be fully charged before the first use.  The 
Bluetooth Ring Scanner 8-Bay Charger must be purchased 
separately.
Scan 
Window
Trigger
Optional C-ring 
in small and 
large sizes to 
replace ring 
strap
Ring Strap
Bluetooth 
module
Trigger Rotation
Attach Ring to Finger
1. Remove the shipping film from the ring scanner window.
2. Slide your finger into the loosened ring strap.
3. Pull the ring strap to secure the ring to your finger.
Note: If using the C-ring, simply slide it on to your finger.
Left Hand
Right Hand
Scanner head can 
be rotated 180°
Shipping 
film
Change Ring Strap to C-Ring
1. Turn the ring scanner 90°.
2. Press the latch down.
3. Remove the ring strap.
4. Reverse these directions to attach the C-ring.
Replace the Battery
Push the button and slide the lock to open the battery compartment 
on the Bluetooth module and remove the battery.
Replace the battery in the compartment and slide the lock closed.
Wearing the Ring Scanner
The ring cable should not cross under your hand.
Wrist Position When Scanning
Warning:  Do not stare directly into the laser beam.
Incorrect
Incorrect 
Correct
!
How to Scan a Bar Code
Pair the Ring Scanner
The ring scanner can be used with Bluetooth devices, Honeywell 
mobile computers, Honeywell vehicle mount computers, Honeywell 
communication bases and Access Points.   
Pair with a Bluetooth Device 
The 8670 ring scanner can pair with host Bluetooth devices 
such as personal computers, laptops, tablets, and Apple
®
 
devices.
1. Scan the Bluetooth HID Keyboard Connect bar code 
below. 
The ring scanner begins ticking and the LED on top of the 
Bluetooth module blinks to indicate pairing mode.
1D bar codes 
2D bar codes 
Bluetooth HID Keyboard Connect
2. Set your host device so it searches for other Bluetooth 
devices.  (Refer to your host device’s User’s Guide for pair-
ing instructions.) 
3. Once your host device has located the scanner, select the 
8670 ring scanner name from the list displayed.  Some host 
devices will automatically pair with the ring scanner.  If your 
host device automatically pairs with the ring scanner, it dis-
plays a successful pairing message and you do not need to 
continue to the next step.
4. If your host device does not automatically pair with the ring 
scanner, a PIN is displayed.  This PIN must be scanned 
within 60 seconds.  Using the ring scanner, you must 
quickly scan Bluetooth PIN Code below, then scan the 
numeric bar code(s) for the PIN code from the 
, then scan the Save bar code.
When the ring scanner pairs with a host, the LED on the top of 
the ring scanner flashes green and the LED on the Bluetooth 
module remains solid blue.  Your host device should now be 
paired with the ring scanner and be able to accept incoming 
data from the 8670.  
Keyboard Country
Your keyboard layout default is a US keyboard. To change this 
layout, scan the appropriate keyboard country code.
Bluetooth PIN Code
Belgium
Denmark