Honeywell International Inc. 610002 User Manual
2 - 1
2
Getting Started
Out of the Box
Verify that your carton contains the following items:
• Dolphin 6100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• Dolphin 6100 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Product
Service and Repair
on page
10-1.
Step 1. Install the Main Battery
The 6100 is shipped with the battery packaged separate from the unit. Follow the steps below to install
the main battery.You will need to loosen the hand strap, remove the battery door, insert the battery, and
replace the battery door.
1.
the main battery.You will need to loosen the hand strap, remove the battery door, insert the battery, and
replace the battery door.
1.
Release the strap making it convenient to reach the cover.
2.
Remove the battery compartment cover by turning the cover’s pins upward and lifting the cover up.
3.
Insert the battery into the battery well with the labels facing upward and the contacts facing
downward.
downward.
4.
Replace the cover with a hinging motion and turn the pins downwards.
Note: The battery door must be installed prior to booting the unit.
5.
Replace the hand strap.
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.
Cover Pins
Main Battery
!