Adtran 1287567G1 User Manual
ONT TA334RG Hardware Installation Manual
Notice
ADTRAN have the sole right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any
time and to discontinue any product or service without notice, ADTRAN has the final interpretation.
time and to discontinue any product or service without notice, ADTRAN has the final interpretation.
10
Figure 5 Mount the bracket into the wall
4.
Wrap the fiber optical cable on the fiber storage tray. Make sure the SC/APC connector
comes out from the bottom left side in case of horizontal mounting, or left up side in case
of vertical mounting. Secure the fiber with the cable holder.
comes out from the bottom left side in case of horizontal mounting, or left up side in case
of vertical mounting. Secure the fiber with the cable holder.
5.
Slide the ONT unit into the mounting bracket in up to down direction, using the 4 guides on
the bracket. Make sure the panel with the interfaces is facing down in case of horizontal
mounting, or facing left in case vertical mounting.
the bracket. Make sure the panel with the interfaces is facing down in case of horizontal
mounting, or facing left in case vertical mounting.
6.
Remove the dust covers from the SC/APC optical connectors. Clean the connector if
necessary.
necessary.
7.
Plug in the fiber connector to connect the ONT to the network.
3.3.2
Installing the ONT on Desktop
1.
Locate a safe and accessible site for installation.
2.
Place the ONT unit on the desk.
3.
Remove the dust covers from the SC/APC optical connector. Clean the connectors if
necessary.
necessary.
4.
Plug in the fiber connector to connect the ONT to the network.
3.3.3
Uninstalling the ONT
For uninstall the ONT on the wall:
1.
Plug out the SC/APC optical connector.
2.
If necessary, slide the ONT unit out of the mounting bracket in down to up direction.