Adtran NV402E1 User Manual
NetVanta 1000/1000R Series Hardware Installation Guide
Physical Descriptions
61200500L1-34L
Copyright © 2007 ADTRAN, Inc.
25
Status LEDs
The status LEDs are located to the lower left of RJ-45 port 1. The
WAN
LED reflects the status of an
installed NIM. The
DBU
LED reflects the status of an installed DIM. The
STAT
LED indicates the
unit’s status.
Figure 10. NetVanta 1224STR Front Panel Layout
Figure 11. NetVanta 1224STR PoE Front Panel Layout
NetVanta 1224STR Rear Panel Design
The NetVanta 1224STR and NetVanta 1224STR PoE rear panels are shown below. Refer to Appendix A on page
61 for pinouts.
61 for pinouts.
Figure 12. NetVanta 1224STR (AC) and NetVanta 1224STR PoE Rear Panel Layout
Figure 13. NetVanta 1224STR (DC) Rear Panel Layout
NetVanta 1224STR Rear Panel Interfaces
NIM Option Slot
The NIM option slot accepts a variety of NIM option modules (refer to Option Modules on page 34).
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) which provides for local management and
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
-48V....., 1.2A
+24V....., 2.5A
USE COPPER
CONDUCTORS ONLY