Adtran TRC6410 User Manual
612806420L1-1D
Copyright © 2005 ADTRAN, Inc.
105
DLP-5
Updating the Firmware Using TFTP
Introduction
The TRACER 64x0 supports firmware updates using TFTP or XMODEM. Use the 10/100BaseT/TX
MGMT
Ethernet port and TFTP from a network server or XMODEM (if your Telnet client supports file
transfers), or use XMODEM and the
CRAFT
interface. This DLP provides the steps for a successful
firmware upgrade using the 10/100 BaseT/TX
MGMT
Ethernet port and a TFTP server. (See DLP-6,
Updating the Firmware Using XMODEM, on page 109 for instructions on using XMODEM.)
Tools and Materials Required
•
A PC with Telnet client software
•
A TFTP server accessible on the network
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.