Gemlink Ltd. 2013BT User Manual
Line Out
Micro USB
Charging Port
Power Button
Power
Indicator
When connected to a PC
When not connected to a PC
Pair
Button
Press to
pair.
Pair
Indicator
1.
Connect the included 3.5 mm cable
to the Line Out port on the unit and
the Line In port on your device.
2.
Press the Power Button to
power the unit on.
Note: Make sure the unit is fully charged
before use.
1.
Connect the included Micro USB to
USB charging cable to the Micro
USB Charging Port port on the unit
and the USB port on a computer.
or other charging device.
The device will now charge.
Note: Initial charging time 2.5 hours.
Note: Initial charging time 2.5 hours.
Please charge fully before use.
Power Indicator
Pair Indicator
Pairing
Connecting
Charging
1.
Press the Power Button.
2.
The Pair Indicator
when searching, then quickly to
enter pairing mode. If this does
not occur, press the Pair button.
3.
Using the native controls
on your Bluetooth device,
select the “IAB13” to pair.
If your device requests a password,
enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your
Refer to the user’s manual for your
and connecting Bluetooth devices.
4.
Press the Power Button to turn
Status
Indicator
No light
Charging
Red light
Fully Charged
Green light
(when powered on)
Status
Indicator
No light
Power On
Green light
Low Power
Status
Indicator
Searching
Pairing Mode
Paired
Pairing Mode
Paired
Solid light