Xmark Corporation PT2 User Manual
EXI HALO User Manual
980-000002-000
EXI Wireless Systems Inc.
7
December 2000
Revision 6.0
The figure below shows a typical user screen and identifies its components.
Walk around:
1.
This is the floor plan area. It shows the positions of all controllers, receivers, elevators, and con-
soles that are installed in your system.
soles that are installed in your system.
2.
Floor navigation buttons. Clicking on the desired floor will cause that floor to be displayed on the
screen. The buttons will change color depending on the alarms have occurred on each floor:-
screen. The buttons will change color depending on the alarms have occurred on each floor:-
Green:
Normal
Blue:
Indicates that the cursor is positioned over button
Yellow:
Indicates Pre-alarm condition on floor
Red:
Alarm condition on this floor
3.
These are the action buttons. From here you can Admit a Patient and Discharge or Edit a Patient.
Team leaders may also Disable a Tag.
Team leaders may also Disable a Tag.
4.
This is the list of Active Alarms. When an alarm occurs, the description of the alarm will be dis-
played in this window. In order to Silence or Accept the Alarm, you must point the mouse to the
line with alarm, and click the left mouse button to select. When the alarm is selected it will turn
blue.
played in this window. In order to Silence or Accept the Alarm, you must point the mouse to the
line with alarm, and click the left mouse button to select. When the alarm is selected it will turn
blue.
5.
Once an alarm has been selected from the Active Alarms list, the Username, Password, and Notes
fields will become active. In order to accept an alarm, these three fields must be filled in.
fields will become active. In order to accept an alarm, these three fields must be filled in.
6.
These are the Accept Alarm and Silence buttons. Once the Username, Password, and Notes fields
are filled in, the Accept Alarm button will become active. Click on the Accept Alarm button to
accept the alarm. The Silence button is always available after selecting an alarm from the list.
are filled in, the Accept Alarm button will become active. Click on the Accept Alarm button to
accept the alarm. The Silence button is always available after selecting an alarm from the list.
1
2
3
6
4
5