Xmark Corporation R3R User Manual
EXI HALO Installation & Operation Manual
981-000003-000R4.0
EXI Wireless Systems
8
October 2001
SYSTEM MAINTENANCE SHOULD INCLUDE THE FOLLOWING STEPS:
All Tags should be checked for physical damage after each cleaning, disinfecting or sterilization
procedure.
procedure.
Each Tag should be tested for correct operation before being attached to an infant. The HALO
software prompts for testing of Tags prior to their deployment. Please refer to the appropriate section
in this manual for the instructions.
software prompts for testing of Tags prior to their deployment. Please refer to the appropriate section
in this manual for the instructions.
The warranty on Tags is 3 years, and the batteries within the Tags are expected to last in excess of the
warranty period depending on the usage pattern. Do not leave Tags in the detection field for long
periods of time, and store them in the foil bags supplied. Failure to do so will result in false alarms,
and will reduce battery life.
warranty period depending on the usage pattern. Do not leave Tags in the detection field for long
periods of time, and store them in the foil bags supplied. Failure to do so will result in false alarms,
and will reduce battery life.
Set up a regular system check schedule to verify that the Controllers, Receivers and Tags are
operational. Controllers should have the “Ready” light illuminated to show that they are powered.
Check the operation of the Controller daily by starting a bypass or triggering an alarm using a Tag to
ensure that it is fully operational and protecting the egress point where it is located.
operational. Controllers should have the “Ready” light illuminated to show that they are powered.
Check the operation of the Controller daily by starting a bypass or triggering an alarm using a Tag to
ensure that it is fully operational and protecting the egress point where it is located.
Check each Receiver on a regular basis to ensure that it can receive signals from Tags in the “Off
Body” condition. Failure to regularly check for this operation may lead to failure to detect a Tag that is
removed from an infant, and therefore compromising protection for the infant.
Body” condition. Failure to regularly check for this operation may lead to failure to detect a Tag that is
removed from an infant, and therefore compromising protection for the infant.
Whenever you see an infant who is a patient, look for the Tag on this infant to verify that it is still
securely attached. This may require special knowledge as to the placement of the Tag.
securely attached. This may require special knowledge as to the placement of the Tag.
Conduct frequent back-ups of Activity Logs for future reference.
The Halo system also supports other eLink based Transponders such as EXI’s Wrist Tag, which may
be used for pediatrics or for elderly patients where the Infant Tag’s tamper mechanism is not required,
and Asset Tags which can be used for the protection of high value assets.
be used for pediatrics or for elderly patients where the Infant Tag’s tamper mechanism is not required,
and Asset Tags which can be used for the protection of high value assets.
EXI Wireless Systems
Model No.: Halo Asset tag
CANADA: TBD
FCC ID: HE7 ATG
* This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two rules: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Made in Canada
subject to the following two rules: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Made in Canada
Figure 1 -
HALO Receiver Package