Accton Technology 0109WN3501AR User Manual

Monitor Screen

When you start the wireless USB utility, the

information window for the WN3501AR is shown as

the figure below. Click on the Monitor tab to

monitor the network status of the wireless adapter,

including the BSS ID, current channel, link quality, and

signal strength.

Click Modify to configure Operating Mode,

Channel, SSID and Tx Rate. After

configuration, just click Apply to save the changes.
Operating Mode - Set the station operation mode to

802.11 AdHoc for network configurations that

do not have any Access Points, or to

Infrastructure for configurations with Access

Points. (Infrastructure is the default setting)

Channel - If you are setting up an ad hoc wireless

LAN (see page 23), set the channel number to the

same radio channel as that used by the other

wireless clients in your group. However, if you are

connecting to a network via an Access Point, then

the channel is automatically set to the channel of

the Access Point that the adapter connects to.

SSID - Input an SSID string that you want to

connect to (ANY is the default setting). If you

will be roaming among multiple Access Points

with different BSSIDs, a value of ANY will

allow connecttion to any SSID.