Unitech Electronics Co. Ltd. PA968IIBTGP User Manual

A backup battery cell is embedded into your device to prevent data loss when

the removable battery pack is removed or completely discharged. This backup

battery will keep the data and system setting for up to 8 hour if the main battery

is removed.

NOTE: To enable the internal battery cell to provide backup power supply,

charge your device with the main battery pack for at least 16 hours.

NOTE: To power on the device properly, make sure replacing the battery

compartment cover after installing the battery.

1. Open the battery compartment

cover by sliding the tabs on both

sides in the direction of the arrows

shown and lift the cover up.

2. Turn ON the Backup Battery

Switch.

3. Position the battery pack, making

sure the battery contacts are

aligned with the contacts in the

compartment and the battery is

placed on top of the plastic tab.

4. Slide the battery pack while

simultaneously pulling the plastic

tab until the battery clicks into

place.

5. Replace the battery compartment

cover, push down the tabs and

slide them back into place as

shown.

NOTE:

Make sure the battery compartment cover is securely closed, or you

may be unable to turn ON the terminal.