Intermec Technologies Corporation WAMIG2 User Manual

Page of 2
MyriadPro
Intermec’s MobileLAN™access family of access points delivers reliable and seamless wireless
performance to almost any operational environment. The MobileLAN access WA22 is
powered by power over Ethernet to make installation easier. It is designed for standards-
based connectivity and it may have up to two of the following radios installed:
IEEE 802.11a
IEEE 802.11b
IEEE 802.11b/g
The WA22 with an IEEE 802.11b radio installed is Wi-Fi certified for
interoperability with other 802.11b wireless LAN devices.
This quick start guide helps you to understand the WA22 ports and LEDs. You can also use
this quick start guide to get an overview of how to install the WA22, how to connect the
WA22 to power and to your network, and how to use the MobileLAN access Utility to
configure its IP address. Once you assign the WA22 an IP address, you can continue
configuring it using a web browser interface or a telnet session.
For complete instructions on how to install, operate, configure, maintain, and troubleshoot
your WA22, see the MobileLAN access System Manual (P/N 067150). Please visit the Intermec
web site at www.intermec.com to download this manual and other current manuals in PDF
format. Or, you can order printed documentation from your local Intermec representative.
Out of the Box
MobileLAN
access W
A22
Heading 1
About the WA22
Safety First
Quick S
tart Guide
Specifica
tions
Softw
are
 Update
s
MobileLAN access 
WA22 Quick Star
t Guide
*072829-002*
*072829-002*
Ph
ysical 
dimensions
4.6 cm x 16.0 cm x 25.0 cm
(1.81 in x 6.27 in x 9.84 in)
Po
wer o
ver Ether
net
electr
ical ra
ting
x 48V
, 315 mA
Oper
ating 
temper
atur
e
-20°C to
 55°C (-4°F to
 131°F)
Stor
age temper
ature
-40°C to
 70°C (-40°F to
 158°F)
Humidity
10 to
 90%, non-condensing
Government regulatory agencies require that this access point only use approved
antennas. Therefore, this access point uses a custom antenna connector. Do not
use antennas that are not approved for use with this access point.
Attention: Les organismes de réglementation gouvernementaux exigent que ce
point d’accès. Par conséquent, le point d’accès est doté d’un connecteur
d’antenne personnalisé. N’utilisez pas des antennes qui ne sont pas approuvées.
The WA22 is intended to be powered only from an Ethernet host that complies
with the IEEE 802.3af specification for power over Ethernet (POE).
Le WA22 est conçu pour être alimenté à partir d’un hôte Ethernet qui est
conforme à la spécification IEEE 802.3af pour l’alimentation par Ethernet (POE, de
l’anglais Power Over Ethernet).
You should check the I
nte
rmec M
obileLAN w
eb site a
t h
ttp://mobilelan.inte
rmec
.com f
or
free sof
tw
are do
wnloads and the latest documen
tation. 
To
 upgrade y
our access point
softw
are
, f
ollo
w the instructions in the 
MobileLAN ac
cess Syst
em Manual
.
Click So
ftw
are
Do
wnloads.
This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
Note: The WA22 does not ship with an antenna (except one 802.11a radio
configuration that ships with non-removable antennas). For a list of  antennas and
antenna accessories, see the MobileLAN access System Manual or contact your local
Intermec representative.
6001 36th Avenue West
Everett, WA  98203
U.S.A.
www.intermec.com
© 2003  Intermec Technologies Corp. 
All Rights Reserved
Mounting bracket and 
shoulder scews (4)
Document
package
MobileLAN access WA22
CD