The Whistler Group SC04 User Manual
38
Limit Search Object (LMIT)
Because a LMIT object is assigned to a scan list, it
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new LMIT object:
can be used to search while the radio is scanning. It
can also be used as a stand-alone search.
To create a new LMIT object:
1. Press PROG.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the LMIT softkey.
2. Press the NEW softkey.
3. Press the SRCH softkey.
4. Press the LMIT softkey.
5. Configure settings for the object. To restore
the default setting, press the
Dflt softkey. Enter
the beginning ( FrLo) frequency then enter the
ending (FrHi) frequency.
ending (FrHi) frequency.
6. Name your search in the Tag field.
7. To search while scanning, assign the object to a
7. To search while scanning, assign the object to a
scan list.
8. Press the Save softkey.
To begin a Limit search:
1. Press MAN.
2. Use the 4-direction keypad to navigate to the
2. Use the 4-direction keypad to navigate to the
LMIT object.
3. Press the SRCH softkey (not SRCH on the
keypad).
4. Press PAUSE to hold on a transmission. To
resume, press
PAUSE again.
• Press the
FrL/O softkey lock out a frequency.
• Press the
STOR softkey to create a new CONV
object using the found frequency.
Change
Setting
Scroll