Zero One Technology Co. Ltd. WU04001 User Manual

V0.2.32 Draft version, for evaluation sample only.

5. Configuration from Embedded Web Server

The Print Server contains an embedded web server that can be accessed through a 
supported web browser on a LAN, for example, IE 4.0, Netscape 4.0 or above is 
recommended.

The embedded web server provides access to configuration and management pages for the 
print server and the connected peripheral device. 

Before you can use the embedded web server, the print server must be configured with an IP 
address. There are many ways to configure the print server’s IP address. For example, the 
Windows-based of PSAdmin utility can easily set an IP address with the print server, please 
see the Properties – TCP/IP options of chapter 3. 

After an IP address is established on the print server, perform the following step: 

Once you have finished the IP address configuration with print server. You should be use 
web browser to view and management the print server. The status menu of the print server 
helps administrator control the print server’s System, Printer, NetWare, TCP/IP, SNMP and 
AppleTalk of status for the time being. 

Enter the print server’s IP address in the Address field of your Web browser. Press Enter. 
Then the print server page will appear. From here you can configure all print server settings. 

Please follow this information in the status menu of the print server: 

1.Click Status, it then appears the sub-menu. 

2.Click System, it then as shown in the following picture. 

32