Proxim Wireless Corporation US5358-GX1 User Manual
Lynx.GX and Tsunami Wireless Radio Installation and Maintenance
This product must be serviced by trained personnel only.
Do not:
•
Disassemble this product. By opening or removing any covers, you could expose yourself to hazardous
energy parts. Incorrect reassembly of this product can cause a malfunction or electrical shock when the
unit subsequently is used.
■
Insert any objects of any shape or size inside this product while powered. Objects could contact
hazardous energy parts, resulting in a risk of fire or personal injury.
■
Spill any liquids of any kind on or inside this product.
■
Cover or block any of the openings (to protect this product from overheating). Side openings are
provided for ventilation.
Always ensure the following:
■
Always ensure that sufficient space is provided above and below this product.
This product can be installed in a standard 19-inch rack. Check the size and clearance requirements for
this product and ensure that enough clearance is provided for installation. Consideration should be given
to the mechanical loading of the rack and the equipment to avoid potential hazards.
■
If this product is to be powered from the same source as other units, ensure that the power supply
circuit is not overloaded.
■
When installed in a rack, always ensure that proper air flow is provided for this product.
■
If you are using a handset not provided by Proxim with this product, ensure that the handset is a UL-
Listed (ITE) device that has been evaluated to the Standard for the Safety of Information Technology
Equipment, including Electrical Business Equipment, CAN/CSA C22.2, No. 950-85 * UL 1950, Third
Edition.
The maximum room ambient temperature (Tmra) for this product is 65° C. When installed in a closed or
multiunit rack, consideration should be given to installing this equipment in an environment compatible with
the Tmra.
Equipment is suitable for mounting on concrete or other noncombustible surfaces only.
This equipment must be earthed. If you are not using the power supply provided by
Proxim, you must connect the earthing conductor of your power source to the earthing
terminal located on the back of the unit; or, connect an earthing conductor between the
unit’s earthing terminal and your earthing point. For safe operation, always ensure
that the unit is earthed properly, as described in this book and shown in the following
figure.
Proxim, you must connect the earthing conductor of your power source to the earthing
terminal located on the back of the unit; or, connect an earthing conductor between the
unit’s earthing terminal and your earthing point. For safe operation, always ensure
that the unit is earthed properly, as described in this book and shown in the following
figure.
Chapter 1. Introduction
1-12
CPN 62140
12/01/02