Panasonic WJ-ND300A 8TB WJ-ND300A/8TB Leaflet

Product codes

WJ-ND300A/8TB

http://panasonic.net/security/

Printed in Japan (2A-001BA)

Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– Axis is a registered trademark of Axis Communications AB.

– "Super Dynamic", "SDII", "SDIII" and "i-Pro" logos are trademarks or registered trademarks of

Panasonic Corporation.

Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that

reside on the network.

DISTRIBUTED BY:

• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• All product pictures are NTSC models.

ARARM

SUSPEND

OPERATE

ERROR

TIMER

REC

LINK1

LINK2

HDD1

HDD2

HDD3

HDD4

ESC

SET

PULL

Specifications

TV System

NTSC

PAL

Supported Supported Cameras

Panasonic i-Pro series Network cameras. (Contact Panasonic for BB series and Axis

cameras)

Cameras

Supported Image Format H.264, MPEG-4 (Specific cameras), JPEG, M-JPEG

Supported Image Resolution 1,280 x 960, 960 x 720, 640 x 480, 320 x 240 (Depending on the camera)

Maximum Number of Cameras 32

Recording Recording Mode

Manual recording, Scheduled recording, Emergency recording,

External timer recording, Event recording

Pre-alarm Recording

Up to 60 minutes. Dedicated HDD for Pre-alarm is required

Scheduled Recording Mode 4 programs, 6 time zones/day, Independent setup for each day of the week.

Frame Rate/Camera

Up to 30 ips (Depending on the camera and Network)

Browser

Camera Control

Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode

GUI

REC/Playback Control

REC, PLAY, Rev PLAY, Pause, Stop, FF, REW, Prev Record, Next Record, Prev Image,

Next Image, A-B Repeat, Goto Date, Goto Last (5 sec. ~ 5 min.), Text display

Search Mode

Search criteria: Time date, Event type, Camera number, Text ON/OFF

Display Mode

Spot/Quad (8 patternes)/Spot Sequence/Quad Sequence (Live, Playback)

Camera Grouping

8 groups each with 16 characters title

Image Download

Recorded data of selected camera and time range (up to 20 min.) can be

downloaded to a PC. Viewer software can be downloaded separately.

SD Memory

Image data in the SD memory installed in the selected camera

Data Download

can be transferred to the recorder.

Copy

Recorded data of selected cameras and time date range can be copied to the COPY partition.

Camera Title

On the browser, Up to 16 characters

Clock Display

On the browser. Time: 12H/24H, Date: 3 formats

Alarm Control

Reset, Suspend

Digital Zoom

Up to 4 times

Text Attachment

Free comment can be attached for each record and reviewed at later time. Up to 200 characters

System Log

Operator access (100), Network error (1,000), Error (100), Event (750)

Time Synchronization

Terminal (Master or Slave), NTP (Client)

Summer Time

User definable (using menu setup)

GUI / System Setup Language English, French, Italian, Spanish, German, Russian, Chinese, Japanese

Supported OS

Microsoft

Windows

7 Professional 64 bit/32 bit & Windows

Internet Explorer

8.0 32 bit,

and Browser

Microsoft

Windows Vista

32 bit SP1 & Windows

Internet Explorer

7.0,

Combination

Microsoft

Windows

XP Home/Professional SP3 & Windows

Internet Explorer

6.0

The language of OS must be the same as selected GUI language.

Required PC JPEG/

CPU: Intel

Pentium

4 3.0 GHz or faster, RAM: 1 GB or more,

MPEG-4

VRAM: 128 MB or more (Min. 64 MB), Microsoft

DirectX

9.0c or later

H.264

CPU: Intel

Core

i7-920 or faster, RAM: 3 GB or more,

VRAM: 128 MB or more (Min. 64 MB), Microsoft

DirectX

9.0c or later

Alarm/

Alarm Source

16x Terminal inputs, 16x Camera alarms, Panasonic Alarm Protocol

Event

Event Mode

Alarm/Activity/OFF

Alarm Action

Alarm recording, E-mail notification, Alarm message, Camera positioning,

FTP image transfer, Terminal output, Panasonic alarm protocol output, Buzzer, Indicator

Alarm Control

Reset, Suspend

Event Log

750

Network

Network Interface

Camera port: 10Base-T/100Base-TX (RJ-45) Client port: 10Base-T/100Base-TX (RJ-45)

Maintenance port: 10Base-T (RJ-45)

Maximum Band Width

Total 97 Mbps

Bandwidth Control (Client Port) 32 k / 64 k / 128 k / 256 k / 512 k / 1,024 k / 2 M / 5 M / 10 M (bps) and unlimited

Supported Protocol

TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, RTP

E-mail

Upon Alarm or Warning

No. of Client at a Time

User Registration

Up to 32 users

User Level

4 Levels (Programmable)

Partitioning

User - Camera (View only, View & Control, No Access)

Security Method

User authentication (ID and Password), Host authentication (IP address), Alteration detection

External

Alarm Connector Alarm

Alarm input 1 ~ 16

, Alarm output 1 ~ 7

Interface

(25pin D-sub)

Alarm/

Alarm

Alarm output 8 ~ 16

Alarm suspension input

, Alarm reset input

Control

Emergency recording input

, Power outage detection input

Connector

External recording mode switching

, Power outage recovery completion output

(25pin D-sub)

Time adjustment input/output

, +5 V output

Error/

Network error output

, Available disk space warning output

Warning

HDD error output

, Camera error output

, Error output

External Strage

High-speed serial interface 480 Mbps (theoretical value) for WJ-HDE300 Extension Unit

RS-232C

For servicing purpose only

HDD

Type

1x 3.5 inch 250 GB HDD (Factory default),

Up to 4x 2 TB HDDs can be installed. (Contact Panasonic for detail)

Maximum Capacity

56 TB (with 6x WJ-HDE300 Extension Units, 4x 2 TB HDDs installed in each unit)

RAID

RAID5 supported (with WJ-NDB301 RAID5 Board)

Partitioning

Normal/Event/Copy

Viewer

Playback Control

Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image

Software

Additional Functions

Alteration detection, Save as JPEG, Two times zoom, Print

Supported OS, Language Same as browser GUI, Language of the software will be English

Admin Software Supported OS, Language Same as browser GUI, Language of the software will be English

Quick IP Setup Supported OS,

Same as browser GUI, Language of the software will be English

Software

Language

TV System

NTSC

PAL

General

Safety/EMC Standard

UL (6500), FCC (Part15 ClassA),

CE (EN60065, EN55022 ClassB, EN55024),

Specifications

C-UL (E60065), DOC (ICES003 ClassA) GOST (GOST R 51558)

Power Source

120 V AC, 60 Hz

220 ~ 240 V AC, 50 Hz

Power Consumption

approx. 85 W

Ambient Operating Temperature +5 °C ~ +45 °C (41 °F ~ 113 °F)
Ambient Operating Humidity 5 % ~ 90 % (without condensation)

Maximum Operating Altitude 2,000 m (6,500 feet) above sea level

Dimensions

420 mm (W) x 88 mm (H) x 350 mm (D) (16-9/16" (W) x 3-7/16" (H) x 13-3/4" (D))

(excluding rubber feet and projections)

Weight

8.3 kg (18.3 lbs.)

Part Names and Functions

Appearance

ARARM

SUSPEND

OPERATE

ERROR

TIMER

REC

LINK1

LINK2

MAINTENANCE

HDD1

HDD2

HDD3

HDD4

ESC

SET

PULL

Network Disk Recorder

WJ-ND

10/100BASE-T

EXT ST

ORAGE

SERIAL

CAMERA

SIGNAL GND

POWER

AC IN

ALARM/CONTROL

ALARM

CAUTION

TENTION

320(12-5/8")

480(18-7/8")

465(18-5/16")(Mounting Pitch)

420(16-9/16")

88(3-7/16")

10.5

(7/16")

76(2")

(Mounting Pitch)

(3-7/16")

350(13-3/4")

270(10-5/8")

40(1-9/16")

8.8(3/8")

MAINTENANCE

Front View

Rear View

External Storage Connector
Client PC Port
Camera Port
Serial Connector (for maintenance purpose)
Alarm/Control Connector

Alarm Connector
Signal Ground Terminal
Power Switch
Power Cord Inlet

Operate Indicator
Alarm Suspension Indicator
Alarm Indicator
Error Indicator
Timer Indicator
Recording Indicator
Camera Link Indicator

PC Link Indicator
HDD Access Indicators
LCD
Arrow Button
Escape Button
Set Button
Maintenance Port

10/100BASE-T

EXT STORAGE

SERIAL

CAMERA

SIGNAL GND

POWER

AC IN

ALARM/CONTROL

ALARM

Unit: mm (inches)

*1: Non-voltage make contact, +5 V pull-up 150 Ω *2: Open collector output, 24 V max., –100 mA
*3: High (+5 V ~ +12 V, 6.3 mA maximum) *4: 52 kΩ, 5 V pull-up, –100 mA / make contact *5: 200 mA at maximum