Senstar Corporation 24000 User Manual
9^cdQ\\QdY_^]USXQ^YSQ\
CUbYUc!& 9^cdQ\\QdY_^Q^T_`UbQdY_^WeYTU##
Installation - mechanical
Mounting units
Both the transmitter and receiver units must be securely mounted to prevent movement or vibration. Excessive
movement or vibration of either units will cause nuisance alarms. Windy conditions are a potential problem if the
units are not mounted properly. Refer to Figure 3-2 for a visual overview of the following instructions.
movement or vibration of either units will cause nuisance alarms. Windy conditions are a potential problem if the
units are not mounted properly. Refer to Figure 3-2 for a visual overview of the following instructions.
Figure 3-1: Series 16000 microwave unit (receiver)
TB1
TAMPER
SWITCH
SWITCH
J3
Antenna
Electronic PCB
(receiver unit)
(receiver unit)