Senstar Corporation LM100 User Manual
Senstar LM100 Product Guide
Page 7
1
System planning
Description
The Senstar LM100 intelligent perimeter lighting and sensing solution combines high-intensity
LED lighting with an accelerometer-based vibration detection sensor. The system is comprised of
a distributed set of LM100 luminaires, which include the LED lights and the vibration detecting
sensor, a gateway device that processes the signals from the luminaires, and a luminaire AP
(access point) that provides an RS-485 half-duplex connection between the RF-based luminaires
and the gateway.
LED lighting with an accelerometer-based vibration detection sensor. The system is comprised of
a distributed set of LM100 luminaires, which include the LED lights and the vibration detecting
sensor, a gateway device that processes the signals from the luminaires, and a luminaire AP
(access point) that provides an RS-485 half-duplex connection between the RF-based luminaires
and the gateway.
The Senstar LM100 luminaires are typically mounted on the perimeter fence, but can also be
mounted on walls or other surfaces. The luminaires communicate over a proprietary wireless
mesh network transmitting status information and receiving control point commands from the
gateway via the hard-wired connection to the luminaire AP. The gateway provides the user
interface to the distributed luminaires as well as the interface between the luminaires and a
security management system (SMS). The gateway device supports up to 100 luminaires (the
luminaire AP is included in the 100 unit limit for each Senstar LM100 system).
mounted on walls or other surfaces. The luminaires communicate over a proprietary wireless
mesh network transmitting status information and receiving control point commands from the
gateway via the hard-wired connection to the luminaire AP. The gateway provides the user
interface to the distributed luminaires as well as the interface between the luminaires and a
security management system (SMS). The gateway device supports up to 100 luminaires (the
luminaire AP is included in the 100 unit limit for each Senstar LM100 system).
Figure 1: luminaires at night