Senstar Corporation LM100 User Manual
Senstar LM100 Product Guide
Page 73
b
Specifications
gateway
Model
•
gateway circuit card and enclosure
PCB dimensions (L x W)
•
13.2 x 14.5 cm (5.2 x 5.7 in.)
Quantity
•
one gateway per Senstar LM100 system
Enclosure
•
IP66/NEMA 4 painted aluminum, outdoor rated
•
L x W x D
26 cm (+2.5 for cable glands) x 16 cm x 9 cm
10.25 in. (+1 for cable glands) x 6.3 in. x 3.5 in.
26 cm (+2.5 for cable glands) x 16 cm x 9 cm
10.25 in. (+1 for cable glands) x 6.3 in. x 3.5 in.
•
4 holes for flat surface mounting, use 7 mm (¼ in.) hardware
Cable entry ports
•
4 small cable ports (17 mm, 0.67 in.) fitted with 9.5 mm (3/8 in.)
compression glands: cable range: 2.9 - 7.9 mm (0.115 to 0.312 in.)
compression glands: cable range: 2.9 - 7.9 mm (0.115 to 0.312 in.)
•
1 large cable port (22.2 mm, 0.875 in.) fitted with compression gland:
cable range: 4.3 - 11.4 mm (0.17 to 0.45 in.)
cable range: 4.3 - 11.4 mm (0.17 to 0.45 in.)
Probability of detection
•
95% with a 95% confidence factor for cutting the fence, lifting the fence
fabric, or climbing over the fence unaided (based on a high quality
chain link fence, and following manufacturers’ installation and
calibration recommendations)
fabric, or climbing over the fence unaided (based on a high quality
chain link fence, and following manufacturers’ installation and
calibration recommendations)
Maximum recommended
fence coverage
(per system)
fence coverage
(per system)
•
600 m (1970 ft.) max. recommended fence length
•
100 luminaires (including luminaire AP)
Power consumption
•
0.5 W nominal; 1.0 W nominal with NIC and option card
Power input
•
12 to 48 VDC (nominal)
•
absolute minimum 10 VDC
•
absolute maximum 60 VDC
Connectors
•
removable terminal block for power input
•
removable terminal block for input/output connections
•
removable terminal block for RS-485 cable input
•
USB port for UCM connection
•
20-pin socket for network interface card/option card/wireless gate
sensor receiver
sensor receiver
•
micro SD card slot