Rexon Technology Corp RHP-520 User Manual

Important Notice!

FCC RF Exposure Compliance Requirements for Occupational Use Only:

This Radio has been tested and complies with the Federal Communications Commission (FCC) RF exposure limits for
Occupational Use/Controlled exposure environment. In addition, it complies with the following Standards and
Guidelines:

FCC 96-326, Guidelines for Evaluating the Environmental Effects of Radio-Frequency Radiation.

FCC OET Bulletin 65 Edition 97-01 (1997) Supplement C, Evaluating Compliance with FCC Guidelines for Human

Exposure to Radio Frequency Electromagnetic Fields.

ANSI/IEEE C95.1-1992, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency

Electromagnetic Fields, 3kHz to 300 GHz.

ANSI/IEEE C95.3-1992, IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic

Fields-RF and Microwave.

This radio is NOT approved for use by the general population in an uncontrolled environment.

This radio is restricted to occupational use, work related operations only where the radio operator must have
the knowledge to control its RF exposure conditions.

When transmitting, hold the radio in a vertical position with its microphone 1 to 2 inches (2.5 to 5cm) away
from your mouth and keep the antenna at least 1 inch (2.5cm) away from your head and body.

The radio must be used with a maximum operating duty cycle not exceeding 50 %, in typical Push-to-Talk
(PTT) configurations. You can cause the radio to transmit by pressing the PTT button.

DO NOT transmit for more than 50 % of total radio use time (50 % duty cycle). Transmitting more than 50 % of
the time can cause FCC RF exposure compliance requirements to be exceeded.

vii