ZyXEL Communications Corporation NBG6616 User Manual
Chapter 16 Static Route
NBG6616 User’s Guide
130
The following table describes the labels in this screen.
Table 56
Network > Static Route: Add/Edit
LABEL
DESCRIPTION
Static Route
Select to enable or disable this rule.
Route Name
Type a name to identify this rule. You can use up to 31 printable English keyboard
characters, including spaces.
characters, including spaces.
Destination IP
Address
Address
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
based on network number. If you need to specify a route to a single host, use a subnet
mask of 255.255.255.255 in the subnet mask field to force the network number to be
identical to the host ID.
IP Subnet Mask
Enter the IP subnet mask here.
Gateway IP
Address
Address
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the
same segment as your NBG6616's interface(s). The gateway helps forward packets to
their destinations.
same segment as your NBG6616's interface(s). The gateway helps forward packets to
their destinations.
Back
Click Back to return to the previous screen without saving.
Apply
Click Apply to save your changes back to the NBG6616.
Cancel
Click Cancel to set every field in this screen to its last-saved value.