ZyXEL Communications Corporation OX253P User Manual
Chapter 17 Troubleshooting
OX253P User’s Guide
174
3
Inspect your cables for damage. Contact the vendor to replace any damaged
cables.
cables.
4
Disconnect and re-connect the power adapter to the OX253P.
5
If the problem continues, contact the vendor.
I hear beeping sounds coming from the OX253P.
1
When the OX253P receives signals from a base station, it beeps to notify you.
2
If you do not want to hear beeps from the OX253P, log into the Web Configurator
and disable the buzzer in the ADVANCED > WAN Configuration > Buzzer
screen.
and disable the buzzer in the ADVANCED > WAN Configuration > Buzzer
screen.
17.2 OX253P Access and Login
I forgot the IP address for the OX253P.
1
The default IP address is http://192.168.1.1.
2
If you changed the IP address and have forgotten it, you might get the IP address
of the OX253P by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the OX253P (it depends on the network), so enter this IP address in
your Internet browser.
of the OX253P by looking up the IP address of the default gateway for your
computer. To do this in most Windows computers, click Start > Run, enter cmd,
and then enter ipconfig. The IP address of the Default Gateway might be the IP
address of the OX253P (it depends on the network), so enter this IP address in
your Internet browser.
3
If this does not work, you have to reset the OX253P to its factory defaults. See
Section 17.1 on page 173
.
I forgot the password.
1
The default password of the administrator account is admin.
2
If this does not work, you have to reset the OX253P to its factory defaults. See
Section 9.5 on page 93
.