ZyXEL Communications Corporation P660HNT1AV2 User Manual

 Chapter 13 Filters

P-660HN-Tx(A) v2 User’s Guide

Destination IPv6 Address

Enter the destination IPv6 address of the packets you wish to filter. This field is 
ignored if it is ::.

Destination Prefix Length

Enter the prefix length for the destination IPv6 address.

ICMPv6 Type

Select the ICMPv6 message type to filter. The following message types can be 
selected:

1 / Destination Unreachable: 0 - no route to destination; 1 - 
communication with destination administratively prohibited; 3 - address 
unreachable; 4 - port unreachable

3 / Time Exceeded: 0 - hop limit exceeded in transit; 1 - fragment 
reassembly time exceeded

4 / Parameter Problem: 0 - erroneous header field encountered; 1 - 
unrecognized Next Header type encountered; 2 - unrecognized IPv6 option 
encountered

128 / Echo Request

129 / Echo Response

130 / Listener Query - Multicast listener query

131 / Listener Report - Multicast listener report

132 / Listener Done - Multicast listener done

143 / Listener Report v2 - Multicast listener report v2

133 / Router Solicitation

134 / Router Advertisement

135 / Neighbor Solicitation

136 / Neighbor Advertisement

137 / Redirect - Redirect message

Protocol

This is the (upper layer) protocol that defines the service to which this rule 
applies. By default it is ICMPv6.

IPv6 / MAC Filter Listing

IPv6 / MAC Filter Rule Index

Select the index number of the filter set from the drop-down list box.

#

This is the index number of the rule in a filter set.

Active

This field shows whether the rule is activated.

Interface

This is the interface that the rule applies to.

Direction

The filter set applies to this traffic direction.

ICMPv6 Type

The ICMPv6 message type to filter.

Src IP/PrefixLength

This displays the source IPv6 address and prefix length.

Dest IP/PrefixLength

This displays the destination IPv6 address and prefix length.

Mac Address

This is the MAC address of the packets being filtered.

Protocol

This is the (upper layer) protocol that defines the service to which this rule 
applies. By default it is ICMPv6.

Apply

Click this to apply your changes.

Delete

Click this to remove the filter rule.

Cancel

Click this to restore your previously saved settings.

Security > Filter > IPv6/MAC Filter (continued)