ZyXEL Communications Corporation UAG50 User Manual

Page of 122
UAG50 User’s Guide
 
66 
Item
 
Default
 
Description
 
System/Host Name
 
Empty
 
The system name can consist of up to 
50
 alphanumeric 
characters. 
Domain Name
 
Empty
 
The Domain name can consist of up to 
50
 alphanumeric 
characters. 
Location Information
 
Empty
 
Enter your location information.
 
Date/Time
 
Time Zone
 
GMT
 
Select the appropriate time zone for your location. 
Manual Setting
 
Click Manual Setting to set the system date and time.   
Date
 
Year/Month/Day
 
Enter the Date for the system.
 
Time
 
Hour:Minute:Second
 
Enter the Time for the system.
 
NTP Setting
 
Enable 
Enables or disables NTP (Network Time Protocol) Time 
Server. Network Time Protocol can be utilized to synchronize 
the time on devices across a network. A NTP Time Server is 
utilized to obtain the correct time from a time source and 
adjust the local time. 
Server IP/Domain Name
 
Empty 
Enter the IP address/domain name of NTP server. The 
maximum allowed characters length is 100. 
Update Time
 
0 hours 
Enter the number of hours for update time.
 
Daylight Saving Time
 
Disable
 
Enables or disables Daylight Saving Time (DST).
 
Month/Day
 
Set the Daylight Saving Time (DST) on the UAG50. Adjust the 
begin time and end time. 
NAT (Network Address Translation)
 
NAT
 
Enable
 
Enables or disables NAT Address Translation function.
 
User Session Limited
 
Enable,300
 
Enables or disables user session limit function. This feature 
provides you an ability to control a number of sessions 
allowed for particulars user(s) at the one time. 
IP Plug and Play (iPnP 
Technology) 
Enable
 
Enables or disables plug & play function. When enabled, the 
user needn’t change their network configuration to access the 
Internet. 
Layer 2 Isolation Security
 
Enable
 
If enable plug and play is selected, you can enable Layer 2 
Isolation Security function. When the “Layer 2 Isolation 
Security” enabled, everyone cannot communicate with each 
other. 
Secure administrator IP 
Addresses 
Any
 
Options: Any and Specify. Administrator can specify 5 IP 
addresses or a range to allow remote control access from 
network.