ZyXEL Communications Corporation WAP5705 User Manual
Chapter 1 Getting to Know Your WAP5705
WAP5705 User’s Guide
15
The following table describes the LEDs and the WPS button.
Table 1
Front Panel LEDs and WPS Button
LED
COLOR
STATUS
DESCRIPTION
Quality
Green
On
AP mode: This LED is always on after the system starts up.
Client mode: The WAP5705 is connecting to an AP and the
transmission rate is 65 Mbps or above.
transmission rate is 65 Mbps or above.
Amber
On
Client mode: The WAP5705 is connecting to an AP and the
transmission rate is between 65 Mbps and 19.5 Mbps.
transmission rate is between 65 Mbps and 19.5 Mbps.
Red
On
Client mode: The WAP5705 is connecting to an AP and the
transmission rate is below 19.5 Mbps.
transmission rate is below 19.5 Mbps.
Off
AP mode: The WAP5705 is not receiving power.
Client mode: The WAP5705 is not receiving power or not
associating with an AP.
associating with an AP.
Wireless
Green
On
The WAP5705 is ready, but is not sending/receiving data
through the wireless LAN.
through the wireless LAN.
Blinking
The WAP5705 is sending/receiving data through the wireless
LAN.
LAN.
Off
The wireless LAN is not ready or has failed.
LAN 1-2
Green
On
The WAP5705 has a successful 10/100/1000 Mbps Ethernet
connection.
connection.
Blinking
The WAP5705 is sending/receiving data through the LAN.
Off
The LAN is not connected.
Power
Green
On
The WAP5705 is receiving power and functioning properly.
Off
The WAP5705 is not receiving power.
WPS
Blue
On
WPS is enabled.
Blinking
(slow)
(slow)
The WAP5705 is negotiating a WPS connection with a wireless
device.
device.
Blinking
(fast)
(fast)
The WPS negotiation failed.
Off
The wireless LAN is not ready or has failed.