Kiddesigns Inc 210A User Manual

 

 

CH. No. 

CH. Freq. 

CH. No. 

CH. Freq. 

CH. No. 

CH. Freq. 

1 462.5625 4 462.6375 7 462.7125 

2 462.5875 5 462.6625 --- 

--- 

3 462.6125 6 462.6875 --- 

--- 

 

 

 

                                                       

To ensure that your expose to RF electromagnetic 
energy is Within the FCC allowable limits for 
occupational use, alwaysAdhere to the following 
guidelines: 

 

 
z  DO NOT operate the radio without a proper antenna attached, as this may damaged the radio   

And may also cause you to exceed FCC RF exposure limits, A proper antenna is the antenna 

Supplied with this radio by the manufacturer or antenna specifically authorized by the 

manufacturer for use with this radio. 

z  DO NOT transmits for more than 50% of total radio use time (“50% duty cycle). Transmitting 

more than 50% of the time can cause FCC RF exposure compliance requirements to be   

exceeded. The radio is transmitting when the “TX indicator” lights red. You can cause the 

radio to transmit by pressing the “PTT” switch. 

z  ALWAYS kepp the antenna at least 2.5cm (1 inch) away from the body when transmitting and 

Only use the belt-clip which is listed in instructions when attaching the radio to your belt, etc., 

to ensure FCC RF exposure compliance requirements are not exceeded.   

 

The information listed above provides the user with the information needed to make him or her 

aware of RF exposure, and what to do to as-sure that this radio operates with the FCC RF 

exposure limits of this radio.