Kiddesigns Inc B19 User Manual

XX-B19 - IB (English)
Size: 90 x 150 (mm)
Material: 90gsm WF paper
Color: 1C + 1C (Black)
Date: Apr 09, 2015

XX-B19_040915-A

Printed in China

For iPhone

B19

B19

B19

B19

For other

Computer
connected
to working outlet

Computer USB port

OR

USB Adaptor (not included)

M

1

2

3

4

4

Top View Key:

1. Mode
2. Volume Down/Track Reverse
3. Volume Up/Track Forward
4. Play/Pause/Speakerphone

Back View Key:

1. AUX Jack
2. On/Off Switch
3. Micro USB Charging Port
4. Battery Door

M

1. Connect the Micro USB cable to the micro USB charging port on the back of the speaker.
2. Connect the standard USB plug end of the cable to a power USB port on a computer or 

other USB charging device. The blue LED on the speaker will flash while the unit is 
charging and will glow steadily once fully charged.

Connect one end of a standard 3.5mm audio cable to the headphone jack of your device, 
and the other end to the AUX jack of the speaker. Press the Mode button on the top of the 
speaker

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) 
this device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC rules.  These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications.  However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment.
CAN ICES-3 (B)/NMB-3(B)

AUX

ON

OFF

DC5V

AUX

ON

OFF

DC5V

1

2

3

1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth 

device and make it ‘discoverable’ by turning on Bluetooth mode (check in 
Options or Settings).

2. Press the Mode button on the speaker. The blue LED will flash while the 

speaker attempts to pair with your Bluetooth device. “B19” should appear 
on your device’s Bluetooth screen. If “Not Connected” or a similar 
message appears on your screen, select “B19” to connect to the speaker.

3. If pairing is successful, the blue LED on the speaker will glow steadily. Press Play on both 

the speaker and your device to start listening to music.

 When you are listening to music via Bluetooth and your receive a call, you can answer the 
 call through the speaker by pressing the Play/Pause/Speakerphone button. The music will 
 be disabled during the call, and will resume once you end the call by pressing the 
 Play/Pause/Speakerphone button again.

LED Indicator