L3 Technologies AIS User Manual
Marine Systems
Aviation Recorders
Rev. 02 Page 2--8
July 29/03
July 29/03
Automatic Identification System
Lat
Latitude
Lon
Longitude
Hdg
Vessel Heading in degrees true from Gyrocompass
ROT
Rate of turn in degrees/sec (-- denotes port, + denotes stbd)
COG
Course Over Ground in degrees true from dGPS
SOG
Speed Over Ground in knots from dGPS
2.1.4.
Data Entry Screens
The AIS interface provides the following three data entry screens for completing in-
put of required vessel and voyage data and for modifying the administrator pass-
word. The required data entry screen can be accessed from the main System Con-
figuration menu. This menu is accessed by the key sequence FNC SETUP. The re-
quired screen can be selected by using the DOWN / UP arrow keys to scroll through
the list and pressing ENT to select the highlighted screen name. This will open and
display the screen and free all fields for editing.
put of required vessel and voyage data and for modifying the administrator pass-
word. The required data entry screen can be accessed from the main System Con-
figuration menu. This menu is accessed by the key sequence FNC SETUP. The re-
quired screen can be selected by using the DOWN / UP arrow keys to scroll through
the list and pressing ENT to select the highlighted screen name. This will open and
display the screen and free all fields for editing.
Use the LEFT, RIGHT, UP, DOWN arrows to navigate between fields. Use the ENT
key to select a field to edit. Use the alphanumeric keypad to enter the required data
into the field. Use ENT to save the data entered into the field. Use CAN to cancel
any changes made to edited fields and revert to preexisting data. Once the data
entry is completed, pressing ESC will exit the user to the main System Configuration
screen, allowing the user to go to another menu selection.
key to select a field to edit. Use the alphanumeric keypad to enter the required data
into the field. Use ENT to save the data entered into the field. Use CAN to cancel
any changes made to edited fields and revert to preexisting data. Once the data
entry is completed, pressing ESC will exit the user to the main System Configuration
screen, allowing the user to go to another menu selection.
The System Configuration and Status menu contains the following options:
F
Logon / Logoff
F
Vessel / Voyage Setup
F
Antenna Position Setup
F
View Safety Text Log
F
View Alarm Status
F
View Down--Time Log
F
Edit Change Management Settings
F
Change Password