Applied Concepts Inc ACMI006 User Manual
ERGONOMIC REMOTE CONTROL FUNCTIONS
Fig 2
The ergonomic remote control shown above is the standard control supplied with the S
PATROL
radar unit. Other
optional remotes with a different cases and key configurations are shown on later pages.
LOCK/REL:
LOCK/REL:
In Radar Mode, the LOCK/REL key alternates between target lock and release
functions. The first time the LOCK/REL key is pressed, with a speed in the target
window, that strong target speed is transferred to the middle window and locked along
with the present patrol speed. This state is indicated by the illumination of the LOCK
icon. Pressing LOCK/REL a second time clears the locked contents of both the lock
and the patrol windows.
During lock, the LOCK icon will light. The target window and Doppler audio remain
active after locking.
MOV STA /MENU:
This is a dual function key. The normal function is to toggle between MOVING and
STATIONARY modes: A speed or a [ ] in the patrol window indicates moving mode,
while a blank patrol window indicates stationary mode.
SAME/OPP:
The SAME/OPPOSITE key is used to alternate between same lane moving mode and
opposite lane moving mode. The SAME icon toggles on and off to indicate same lane
mode.
ANT:
The ANT key is used to switch between the front and rear antennas, unless the radar
was factory set for only one antenna. The FRONT or REAR icon will light. The
display unit can sense the presence or absence of the front or rear antenna. A steady
5