Motorola Mobility LLC T56KT1 User Manual

6. Open a second terminal window and configure it to operate with the serial port occupied by 

the 

Follow the procedure below to perform the G30 test:

1. Verify that the line modem is functioning and communicating with the computer by entering 

the AT command 

 in the modem’s terminal window

2. Verify that the G30 is functioning and communicating with the computer by performing the 

following AT commands in the G30 terminal window:

— prompts G30 identification

— prompts the G30 software version

3. Make a CSD call from the G30 to the line modem or the reverse using the 

 and 

 

commands in the appropriate window

4. Verify that a connection between the two modems is established

5. Select any file to transfer between the two modems

6. Send the file either from the G30, or to the G30, through the terminal application using the 

terminal application’s send/receive file options

7. When the file transfer is complete, use the 

 command in any of the terminal windows to 

terminate the call

Computer

Developer Board

with G30 unit

Line Modem

(internal or external)

To telephone line

wall outlet

RS232

Port

Serial

Port

Serial

Port

Serial
Cable