Scosche Industries BTTRNS03 User Manual

IPBTT

BOTTOM DOCK BLUETOOTH TRANSMITTER FOR IPOD

IPBTT OVERVIEW

Congratulations on your purchase of the IPBTT. This unit incorporates the latest Bluetooth

technology for seamless integration with most Bluetooth A2DP enabled products. Before

using, please read this manual carefully.

FEATURES/SPECS

Lithium-ion 10 hour Rechargeable Battery (450mAh capacity)

Designed with 30-pin iPod bottom dock (All iPods EXCEPT Shuffle, Gen 1, Gen 2)

Wireless Range: Up to 30 Feet (10 Meters)

Bluetooth

V1.2

Transmitter Power < 3dbm

Receiver Sensitivity: -78+4dm

Supported Profiles: Advanced Audio Distribution Profile (A2DP) / Audio Video Remote

Control Profile (AVRCP)

Frequency Range: 2.4Ghz - 2.4835Ghz

Dimensions: 55x40x10mm

Weight: 16 grams

Certifications: FCC

Dual RED/BLUE

LED Indicators

Power Button

CHARGING THE BATTERY

NOTE:

Before using the IPBTT for the first time, charge the battery a full 3 hours.

The IPBTT will also charge your iPod battery through the IPBTT power port.

1. Plug the Mini Connector on charger into the charging jack as shown in illustration.

2. Connect USB Cable to an available PC or Laptop USB port.

3. Charge Battery for 3 hours (LED will illuminate RED when charging)

4. The RED LED will turn off when charging is complete. Unplug the IPBTT

and enjoy up to 10 hours of use.

5. Purchase wall and car adapters to charge at home and/or on the road.

(IPPWR / IP2IN1 - Sold Separately)

PAIRING NOTES:

The IPBTT transmitter must be paired with a Bluetooth receiving device before use.

It is designed for AUTO-Pairing functionality. (Passcode = 0000)

Keep the IPBTT and Bluetooth receiving device within a distance of 3ft. (1 Meter)

during pairing.

Compatible devices must be Bluetooth V1.2 supporting A2DP profile.

1. Power up your Bluetooth

receiving device (such as Scosche wireless headphones or

Scosche Bluetooth

receiver) to place it into pairing mode. If needed, consult your

Bluetooth

products manual for information on pairing or discovering other

Bluetooth

devices.

2. While the Bluetooth

receiver LED is flashing, press and hold the power button on the

IPBTT for 3 seconds. The Blue LED indicator light will flash indicating the unit is in

pairing mode.

3. Initial pairing can take a few minutes. If pairing is successful, the IPBTT's LED will switch

from flashing quickly to flashing slowly.

4. Test the connection by plugging the IPBTT into your iPods bottom dock connection with

an audio selection playing. You should hear the audio through your Bluetooth

receiving

device.

5. If pairing is not successful, repeat steps 1-4 above. Make sure both

devices enter pairing mode at or near the same time. Power off any other Bluetooth

device that you do not intend to pair with the IPBTT as these units may interfere or

prevent pairing of other nearby devices. If you still cannot successfully pair two devices,

call

Tech Support at (1-800-621-3695 Ext.3)

Mini Connector

Charging Dock

PAIRING THE TRANSMITTER WITH BLUETOOTH DEVICES

*
*

SCOSCHE

UBHP

(Not Included)

SCOSCHE

UBR/UBRH

(Not Included)

NOT TO SCALE

IPBTT

If you have any further questions, call our TOLL FREE number:

TECHNICAL HELP LINE 1-800-361-3695 Ext.3

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:1) This device may not

cause interference, and 2) this device must accept any interference that may be received, including interference that may

cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modification to this equipment. Such modification could void the user's authority to operate the equipment

IPBTT