Fujitsu TX100 S2 VFY:T1002SH010IN S26361-F2565-L361 Data Sheet
Product codes
VFY:T1002SH010IN S26361-F2565-L361
Data Sheet
Fujitsu PRIMERGY TX100 S2 Server
Page 5 / 7
http://ts.fujitsu.com/Primergy
Components
Hard disk drives
HDD SATA, 3 Gb/s, 1000 GB, 7200 rpm, non-hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, non-hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, non-hot-plug, 3.5-inch, economic
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, non-hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, non-hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, non-hot-plug, 3.5-inch, economic
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, non-hot-plug, 3.5-inch, business critical
Hard disk notes
None of the hard disks for this system are hot-plug.
Only SATA HDDs supported.
Only SATA HDDs supported.
Tape Drives
DDS Gen5, 36 GB, 3 MB/s, half height, USB 2.0
DDS Gen6, 80 GB, 6 MB/s, half height, USB 2.0
RDX Drive, 80 GB, 160 GB, 320 GB, 500 GB, 25 MB/s, half height, USB 2.0
DDS Gen6, 80 GB, 6 MB/s, half height, USB 2.0
RDX Drive, 80 GB, 160 GB, 320 GB, 500 GB, 25 MB/s, half height, USB 2.0
Optical drives
Blu-ray Disc™ Triple Writer, (4x BD-RW; 16x DVD; 40x CD), half height, SATA I
DVD-ROM, (16xDVD; 48xCD), half height, SATA I
DVD Super Multi, (16xDVD, 8xDVD+RW 6xDVD-RW, 12xDVD-RAM; 48xCD, 32xCD-RW), half height, SATA I
DVD-ROM, (16xDVD; 48xCD), half height, SATA I
DVD Super Multi, (16xDVD, 8xDVD+RW 6xDVD-RW, 12xDVD-RAM; 48xCD, 32xCD-RW), half height, SATA I
RAID Controller
Integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI SAS2108)
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI SAS2108)
Notes
The optional BBU is not available for the TX100 S2.
Environmental
Operating temperature note
ETSI 300 019-2-3 Class 3.1
Operating environment
FTS 04230 – Guideline for Data Center (installation locations)
Operating environment Link
http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Electrical values
Power supply configuration
1
Standard power supply output
250 W
Rated voltage range
100 V - 127 V / 200 V - 240 V
Rated frequency range
47 Hz - 63 Hz
Rated current max.
100 V – 240 V / 6.0 A – 3.0 A
Rated current in basic configuration
100 – 240 V / 1,5 – 0,6 A
Active power (min. configuration)
26 W
Active power (max. configuration)
171 W
Apparent power (max. configuration)
171 VA
Heat emission
615.6 kJ/h (583.5 BTU/h)
Power Supply Notes
Fujitsu patented 0-Watt standby technology
Compliance
Germany
GS
Europe
CE Class A *
USA/Canada
CSAc/us
ULc/us
FCC Class A
ULc/us
FCC Class A
Global
CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Compliance notes
There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Compliance link
https://sp.ts.fujitsu.com/sites/certificates/default.aspx