Proxim AP5C User Manual
Configuration
26
SSID
By default, the Harmony System configures new Access Points with the default Service
Set ID (“proxim”). The SSID is a string of up to 32 ASCII characters that must match on
all communicating 802.11a devices within the same network. All Harmony Access
Points and Harmony clients must use the same SSID to allow roaming between Access
Points.
Set ID (“proxim”). The SSID is a string of up to 32 ASCII characters that must match on
all communicating 802.11a devices within the same network. All Harmony Access
Points and Harmony clients must use the same SSID to allow roaming between Access
Points.
Group Membership
Each Access Point can belong to one Access Point Group for management and
configuration purposes. Use the drop-down list to select the 802.11a Group to which
you want the Access Point to belong.
configuration purposes. Use the drop-down list to select the 802.11a Group to which
you want the Access Point to belong.
IP Addressing
The default setting allows the Access Point to receive an IP Address from a DHCP
server on the local network. Otherwise, enter a static IP Address, Subnet Mask and
Default Gateway in the fields provided. In addition, if you use static IP addresses on
your network, you can configure the AP Defaults to automatically assign a Subnet
Mask and Default Gateway for each new Access Point that you add to the System.
server on the local network. Otherwise, enter a static IP Address, Subnet Mask and
Default Gateway in the fields provided. In addition, if you use static IP addresses on
your network, you can configure the AP Defaults to automatically assign a Subnet
Mask and Default Gateway for each new Access Point that you add to the System.