Proxim HRFUSB2 User Manual
34
Select the profile you want to use and click <Enter>. This prompt also
includes an automatic timer so if you do not wish to change the profile, it will
automatically load your current profile after a brief countdown.
includes an automatic timer so if you do not wish to change the profile, it will
automatically load your current profile after a brief countdown.
You can disable this feature by unchecking the box labeled Always prompt
user at startup within the Switcher configuration screen. If this prompt does
not appear automatically and you want to utilize this feature, place a check
mark next to the box labeled Always prompt user at startup within the
Switcher configuration screen. This configuration option is not available on
Windows ME computers.
user at startup within the Switcher configuration screen. If this prompt does
not appear automatically and you want to utilize this feature, place a check
mark next to the box labeled Always prompt user at startup within the
Switcher configuration screen. This configuration option is not available on
Windows ME computers.
Switching Between Profiles
The Location Switcher offers three ways to toggle between profiles:
❑
Method 1: Right-click the Switcher icon in the Windows System
Tray and select the Switch option from the pop-up menu to choose
between profiles.
Tray and select the Switch option from the pop-up menu to choose
between profiles.
❑
Method 2: Select a profile when prompted during boot-up, as
described above.
described above.
❑
Method 3: Launch the Switcher configuration screen, select a profile
from the Switch to Profile dialog box, and click <Switch>.
from the Switch to Profile dialog box, and click <Switch>.
Note:
Methods 1 and 3 above require that you restart the computer each time
you change to a new profile in order for the new settings to take effect.
you change to a new profile in order for the new settings to take effect.
Editing a Profile
To edit the network settings for a particular profile, follow these steps:
1.
Select a profile from the Switch to Profile drop-down menu on the
Switcher Configuration screen.
Switcher Configuration screen.
2.
Click <Edit Profile...>.
3.
Select one of the headings on the left-hand side to view and edit a profile’s
parameters.
parameters.